Task library > Body movements > Get off the vehicle

In this task, the human model moves through the interior of a vehicle / car body towards the entrance / exit flange in order to get out of it. Distinction is made whether the human model is in a sitting or kneeling position.

Subordinate tasks:

Slide to target

Parameter	Type	Mand.	Meaning
Port of entry	Path	yes	A path parameter used for the representation of the entrance / door of the car body. At least three path points must be selected and at least two points with a greater distance must be put onto the door sill. One point should represent the maximum height. This height is used to determine the degree of inclination of the upper body while entering.
Exit target	Position	yes	A coordinate parameter defining the target point / the point of the best exit place for the human model. This point can be put onto the sill of the exit flange or just outside the car body on the floor at the point where the human model is supposed to get out of the vehicle.

iThe parameter Maximum permissible height of the head of the task Get into vehicle sets a condition for the maximum height of the head, which is maintained for all subsequent tasks. After leafing the car by means of the task Get off the vehicle, this condition is suspended.