Navigation:  User interface > Tab "Simulation project"

Figure 26: Tab simulation project

 

The master data is created and stored in the work area Simulation project.

 

Under Name of simulation, the name of the simulation is entered. "Simulation" is preset by default. Under Description, descriptions and comments on the simulation can be made.

 

With the button Cycle time, the cycle time for all existing "Dynamic Objects" / "human models" can be adjusted. The new value is updated automatically. The description of the parameters Cycle time, Cycles per shift and Net time shift can be seen in chapter User interface / Tab "Ergonomics" / EAWS / Inputs and functions)

Using the the parameter Added time [%] and Performance factor, the global time factor for all existing behaviours can be predefined and this adjusts the automatically computed task durations of individual behaviours. The description of the usage of the parameter can be seen in section User interface / Tab "Tasks" / Configuration of the tasks.

The values of these parameters can also be adjusted in the Result cockpit.

 

The remaining data is generated automatically.